Collectible Card Game Headquarters

CARDS LIST | Open

Breaking Wave
Chord of Calling
Deep Spawn
Disrupting Shoal
Dwarven Sea Clan
Ghitu Fire
Minamo's Meddling
Mind Extraction
Rout
Saproling Symbiosis
Stench of Evil
Twilight's Call

ISSUES LIST | Open

We have received several reports about a Null Pointer Exception crash report which contains the following info:

java.lang.NullPointerException
at forge.gui.match.VMatchUI.populate(VMatchUI.java:###)
at forge.control.FControl.changeState(FControl.java:###)

We currently suspect that this is a thread misuse issue. This will cause forge to crash eventually on some systems. Once the SwingWorkers that start different types of matches are refactored this problem should be fixed. The problem with a match starting with a blank screen will also be gone.

A small number of cards including Wall of Corpses, Abu Ja'far and others with a similar ability are not functional. The common issue here is actually that they check the blocker/attacker after being removed from the battlefield. Probably need to use LKI. Regular destroy/destroy all effects work just fine. The problem cards are caring about battlefield specific properties, that no longer apply when the base card is no longer on the battlefield.

On several occasions people have noticed that the Forge deck editor and/or quest mode card shop would not open or display. We have also received reports that some of the tabs/panels in the deck editor are missing. There has also been reports that Forge will crash while creating/populating display components during start up or crash when a match is started. One or both of your layout xml files may be corrupted in some fashion. Try deleting the file(s) named "editor.xml" and/or "match.xml" that are now located in your userDir/preferences/ directory. This should force Forge to then use the default layout xml files instead.

Several people have noticed that the cards displayed on the battlefield will fail to be displayed when the number of cards on the battlefield increases. Maximizing the human panel can help to re-display the cards.

Some time was spent turning the static ETB triggers into the proper ETB replacement effects they should be, mainly to interact correctly with each other. This work is not yet finished. As a result there is currently some inconsistencies with "Enters the battlefield with counters" (Not incredibly noticeable).

A recent contribution to the code base should fix some of the bugs that people noticed with cloning type abilities. At this time there are two remaining issues that we hope will be addressed in the near future.

1. Leave play triggers don't work correct for clones.
2. Copies of cards that setup Zone Change triggers via addComesIntoPlayCommand and addLeavesPlayCommand will not function correctly.

There is currently a known issue with some of the cards that have effects triggering after the card goes to graveyard (e.g. Wall of Corpses, Abu Ja'Far) not working correctly.

Forge is likely to be compatible with Java 7 at this time. Some people have used forge with Java 7 and have not reported any problems that are related to Java 7. If you would like to upgrade to Java 7 and have held off because of Forge then you may upgrade as we do not think that it will cause an incompatibility type of problem. We will continue to try to maintain compatibility with Java 6 for the foreseeable future.

The Forge archive includes a readme.txt file and we ask that you spend a few minutes reading this file as it contains some information that may prove useful. We do tend to update this file at times and you should quickly read this file and look for new information for each and every new release. Thank you.

The archive format used for the Forge distribution is ".tar.bz2". There are utilities for Windows, Mac OS and the various *nix's that can be used to extract/decompress these ".tar.bz2" archives. We recommend that you extract/decompress the Forge archive into a new and unused folder.

Some people use the Windows application 7zip. This utility can be found at http://www.7-zip.org/download.html. Mac users can double click on the archive and the application Archive Utility will launch and extract the archive. Mac users do not need to download a separate utility.

The Forge 05/06/2013 Windows and Linux archive (requires java 6):

forge-1.3.15.tar.bz2 (30.2 MB, at cardforge.org)


Forge 05/06/2013 BETA packaged as a Mac OS application:

forge-1.3.15-osx.tar.bz2 (31.2 MB, at cardforge.org)
 

ConcurrentModificationException | Open

Code: Select all

Forge Version:    1.3.15-r21351
Operating System: Windows 7 6.1 amd64
Java Version:     1.7.0_03 Oracle Corporation

java.util.ConcurrentModificationException
   at java.util.ArrayList$Itr.checkForComodification(Unknown Source)
   at java.util.ArrayList$Itr.next(Unknown Source)
   at forge.Card.getAbilityText(Card.java:2265)
   at forge.Card.getText(Card.java:1957)
   at forge.gui.CardDetailPanel.composeCardText(CardDetailPanel.java:324)
   at forge.gui.CardDetailPanel.setCard(CardDetailPanel.java:301)
   at forge.gui.match.controllers.CDetail.showCard(CDetail.java:49)
   at forge.gui.match.CMatchUI.setCard(CMatchUI.java:248)
   at forge.gui.match.CMatchUI.setCard(CMatchUI.java:244)
   at forge.view.arcane.CardPanelContainer$1.mouseMoved(CardPanelContainer.java:143)
   at java.awt.AWTEventMulticaster.mouseMoved(Unknown Source)
   at java.awt.Component.processMouseMotionEvent(Unknown Source)
   at javax.swing.JComponent.processMouseMotionEvent(Unknown Source)
   at java.awt.Component.processEvent(Unknown Source)
   at java.awt.Container.processEvent(Unknown Source)
   at java.awt.Component.dispatchEventImpl(Unknown Source)
   at java.awt.Container.dispatchEventImpl(Unknown Source)
   at java.awt.Component.dispatchEvent(Unknown Source)
   at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
   at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
   at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
   at java.awt.Container.dispatchEventImpl(Unknown Source)
   at java.awt.Window.dispatchEventImpl(Unknown Source)
   at java.awt.Component.dispatchEvent(Unknown Source)
   at java.awt.EventQueue.dispatchEventImpl(Unknown Source)
   at java.awt.EventQueue.access$000(Unknown Source)
   at java.awt.EventQueue$3.run(Unknown Source)
   at java.awt.EventQueue$3.run(Unknown Source)
   at java.security.AccessController.doPrivileged(Native Method)
   at java.security.ProtectionDomain$1.doIntersectionPrivilege(Unknown Source)
   at java.security.ProtectionDomain$1.doIntersectionPrivilege(Unknown Source)
   at java.awt.EventQueue$4.run(Unknown Source)
   at java.awt.EventQueue$4.run(Unknown Source)
   at java.security.AccessController.doPrivileged(Native Method)
   at java.security.ProtectionDomain$1.doIntersectionPrivilege(Unknown Source)
   at java.awt.EventQueue.dispatchEvent(Unknown Source)
   at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
   at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
   at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
   at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
   at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
   at java.awt.EventDispatchThread.run(Unknown Source)


Pux wrote:Congrats on the new release!

I only got a very minor bug to report:
Description: I got this crash during my opponent's ET phase. I don't really know why. I could continue the game without problems.

Nordos wrote:In the log pannel at the top left corner

EDIT: Hm, I can't find it anymore. :S

SirFunchalot wrote:Just a quick question, but where are the card images saved now? I haven't updated since the addition of gatecrash to forge so I guess I missed something.

- User data migration -
User data files, like decks, saved gauntlets, and card pictures, are now stored in new directories separate from the program data. When this version of Forge is first run, it will scan the program directory for all user data and automatically migrate the files to their new homes. There are three defined user data directores: userDir, cacheDir, and cardPicsDir, and their locations depend on the standard paths for your operating system:

Code: Select all

    Windows:
        userDir=%APPDATA%/Forge/
        cacheDir=%LOCALAPPDATA%/Forge/Cache/ (or %APPDATA%/Forge/Cache/ for windows versions before the local/roaming directory split)
    OSX:
        userDir=$HOME/Library/Application Support/Forge/
        cacheDir=$HOME/Library/Caches/Forge/
    Linux:
        userDir=$HOME/.forge/
        cacheDir=$HOME/.cache/forge/

cardPicsDir is defined as <cacheDir>/pics/cards/ by default. If you wish to use a non-default directory, please see the forge.profile.preferences.example file located in the Forge installation directory root. You can use this file to, for example, share the card pics directory with another program, such as Magic Workstation.

If you are using the Mac OS X version of Forge then you will find the forge.profile.preferences.example file by right clicking or control clicking on the Forge.app icon. Select "Show Package Contents" from the contextual menu. A Finder window will open and will display a folder named Contents. Navigate to the folder:
/Contents/Resources/Java/
and you will find the file named forge.profile.preferences.example.

For reference, here is the full list of moved directories and files:

Code: Select all

Old location      New location
----------------  ----------------------
res/decks/        <userDir>/decks/
res/gauntlet/     <userDir>/gauntlet/
res/layouts/      <userDir>/preferences/
res/preferences/  <userDir>/preferences/
res/quest/data/   <userDir>/quest/saves/
res/pics/         <cacheDir>/pics/
forge.log         <userDir>/forge.log

- New Import Data dialog -
The Import Pictures dialog, accessed via the Content Downloaders submenu, has received an overhaul and has been reincarnated as the Import Data dialog. You may recognize it from the automatic data migration procedure if you had any data to migrate when this version was first started. Instead of just importing pictures from a previous version of Forge, it can now import any kind of Forge data whatsoever. If you have a directory full of deck files, you can use the Import Data dialog to copy or move them to the appropriate directory. If you have just downloaded a torrent of high-quality pics for a particular set, use the Import Data dialog to get them to the proper place. The dialog give you a full listing of all file copy/move operations, so you can see what will happen before you click 'Start Import'.

An importer option was added for including pictures in set-specific card directories that don't map to any currently known card. This handles the case where people have collected complete sets of pics in anticipation of when Forge supports them.

SirFunchalot wrote:Sorry if I seem a little computer retarded, but where on earth is the userDir=%APPDATA%/Forge/ directory? I'm running win7 as my OS but can't seem to locate this section. I am aware that user is most likely refering to the username used on the OS. A simple guide as to how to get there through the "Computer" menu would be awesome.

Xitax wrote:I was able to target a Last Word with a Counterspell. Since it's uncounterable, isn't it untargetable?