Forge Release 09/29/2018 ver 1.6.16
by mtgrares
Moderators: timmermac, Blacksmith, KrazyTheFox, Agetian, friarsol, CCGHQ Admins
Re: Forge Release 09/29/2018 ver 1.6.16
by bduddy » 10 Oct 2018, 19:28
The AI cast Endless One for X=2 even when it only had a basic Swamp on the battlefield. In fact it always seems to cast it for X=2 even when that doesn't match the lands it has.
Snapcaster Mage gave a card in my graveyard flashback, but without a cost, so I couldn't cast it.
Snapcaster Mage gave a card in my graveyard flashback, but without a cost, so I couldn't cast it.
- bduddy
- Posts: 9
- Joined: 01 Mar 2014, 19:51
- Has thanked: 0 time
- Been thanked: 0 time
Re: Forge Release 09/29/2018 ver 1.6.16
by SpiderBrigade » 10 Oct 2018, 19:52
A previously mentioned bug that's been around since 1.6.9:
Prototype Portal is cast from hand, imprinting Sculpting Steel from hand. A second Sculpting Steel is also in hand.
Activate Portal, have the copied Sculpting Steel enter as a copy of Prototype Portal. ETB imprint ability of new Prototype Portal happens, allowing the Sculpting Steel in hand to be copied.
New portal can be activated, costing 3 as expected, but then nothing happens.
Prototype Portal is cast from hand, imprinting Sculpting Steel from hand. A second Sculpting Steel is also in hand.
Activate Portal, have the copied Sculpting Steel enter as a copy of Prototype Portal. ETB imprint ability of new Prototype Portal happens, allowing the Sculpting Steel in hand to be copied.
New portal can be activated, costing 3 as expected, but then nothing happens.
- SpiderBrigade
- Posts: 23
- Joined: 21 Nov 2012, 19:31
- Has thanked: 1 time
- Been thanked: 3 times
Re: Forge Release 09/29/2018 ver 1.6.16
by ElvishSpirit » 11 Oct 2018, 18:45
Liliana, Untouched By Death's +1 mills 3 cards, but the instance of gain 2 lose 2 from zombies doesn't happen.
Thanks for all the hard work guys!
Thanks for all the hard work guys!
- ElvishSpirit
- Posts: 23
- Joined: 01 Jul 2010, 06:21
- Has thanked: 1 time
- Been thanked: 2 times
Re: Forge Release 09/29/2018 ver 1.6.16
by gos » 11 Oct 2018, 21:21
- Attachments
-
- forge0.log
- (3.71 KiB) Downloaded 168 times
- gos
- Posts: 4369
- Joined: 03 Mar 2011, 15:21
- Location: Reykjavík, Iceland
- Has thanked: 231 times
- Been thanked: 232 times
Re: Forge Release 09/29/2018 ver 1.6.16
by sashebalchev » 12 Oct 2018, 08:39
This has occurred even in previous versions of Forge.
When playing Commander with The Gitrog Monster and during the Cleanup Phase, if I discard multiple lands The Gitrog Monster triggers for each one instead of just once like it's supposed to.
You can see the bug and how to recreate it below.
When playing Commander with The Gitrog Monster and during the Cleanup Phase, if I discard multiple lands The Gitrog Monster triggers for each one instead of just once like it's supposed to.
You can see the bug and how to recreate it below.
- sashebalchev
- Posts: 1
- Joined: 04 Oct 2018, 11:32
- Has thanked: 0 time
- Been thanked: 0 time
Re: Forge Release 09/29/2018 ver 1.6.16
by sportswizzard44 » 12 Oct 2018, 19:26
A bug that i found that will no longer allow. Having multiple enchantments such as doubling seasons, parallel lives etc combined with dual nature and opalescence. It will just send the extras away like they were destroyed.
- sportswizzard44
- Posts: 1
- Joined: 24 Jun 2017, 18:57
- Has thanked: 0 time
- Been thanked: 0 time
Re: Forge Release 09/29/2018 ver 1.6.16
by Fregnor » 12 Oct 2018, 20:25
I was wondering, shouldn't cards with the new keyword Jump-start show up under the Flashback icon when they are in the graveyard like other graveyard effect cards do?
Vivid Revival shows you cards from any graveyard, when it is supposed to only be your own graveyard.
The +1 effect of Vivien Reid lets you choose the order to put the cards on the bottom of the graveyard in. They are supposed to go back in random order. The card coding should be more like this:
Vivid Revival shows you cards from any graveyard, when it is supposed to only be your own graveyard.
The +1 effect of Vivien Reid lets you choose the order to put the cards on the bottom of the graveyard in. They are supposed to go back in random order. The card coding should be more like this:
- Code: Select all
Name:Vivien Reid
ManaCost:3 G G
Types:Legendary Planeswalker Vivien
A:AB$ Dig | Cost$ AddCounter<1/LOYALTY> | Planeswalker$ True | DigNum$ 4 | ChangeNum$ 1 | Optional$ True | ChangeValid$ Creature,Land | ForceRevealToController$ True | RestRandomOrder$ True | SpellDescription$ Look at the top four cards of your library. You may reveal a creature or land card from among them and put it into your hand. Put the rest on the bottom of your library in any order.
A:AB$ Destroy | Cost$ SubCounter<3/LOYALTY> | Planeswalker$ True | ValidTgts$ Artifact,Enchantment,Creature.withFlying | TgtPrompt$ Select target artifact, enchantment or creature with flying | SpellDescription$ Destroy target artifact, enchantment or creature with flying.
A:AB$ Effect | Cost$ SubCounter<8/LOYALTY> | Planeswalker$ True | Ultimate$ True | Name$ Emblem - Vivien Reid | Image$ emblem_vivien_ried | Duration$ Permanent | StaticAbilities$ STVivien | AILogic$ Always | SpellDescription$ You get an emblem with "Creatures you control get +2/+2 and have vigilance, trample, and indestructible."
SVar:STVivien:Mode$ Continuous | EffectZone$ Command | Affected$ Creature.YouCtrl | AffectedZone$ Battlefield | AddPower$ +2 | AddToughness$ +2 | AddKeyword$ Vigilance & Trample & Indestructible
Oracle:[+1]: Look at the top four cards of your library. You may reveal a creature or land card from among them and put it into your hand. Put the rest on the bottom of your library in a random order.\n[-3]: Destroy target artifact, enchantment, or creature with flying.\n[-8]: You get an emblem with "Creatures you control get +2/+2 and have vigilance, trample, and indestructible."
Loyalty:5
Last edited by Fregnor on 13 Oct 2018, 06:37, edited 2 times in total.
Re: Forge Release 09/29/2018 ver 1.6.16
by jamincollins » 12 Oct 2018, 23:11
You'll need to provide more details about both of these. Copies of your forge.log frequently help, as do screenshots illustrating the board state and issue.bduddy wrote:The AI cast Endless One for X=2 even when it only had a basic Swamp on the battlefield. In fact it always seems to cast it for X=2 even when that doesn't match the lands it has.
Snapcaster Mage gave a card in my graveyard flashback, but without a cost, so I couldn't cast it.
- jamincollins
- Posts: 73
- Joined: 17 Oct 2017, 00:41
- Has thanked: 1 time
- Been thanked: 19 times
Re: Forge Release 09/29/2018 ver 1.6.16
by Mrs Non-Gorilla » 13 Oct 2018, 01:33
Crush of Tentacles' surge effect doesn't seem to happen. See the screenshot, where I played a Duress and then surged it, and don't have an octopus token.
- Mrs Non-Gorilla
- Posts: 74
- Joined: 18 Nov 2014, 20:32
- Has thanked: 3 times
- Been thanked: 4 times
Re: Forge Release 09/29/2018 ver 1.6.16
by Utterly » 13 Oct 2018, 22:13
How do you rename the pictures of double sided cards like "Connive // Concoct" so they show up in forge?
Re: Forge Release 09/29/2018 ver 1.6.16
by moush » 14 Oct 2018, 15:52
Forge only uses the first word as the name of the card, so "Connive".Utterly wrote:How do you rename the pictures of double sided cards like "Connive // Concoct" so they show up in forge?
Re: Forge Release 09/29/2018 ver 1.6.16
by gos » 15 Oct 2018, 12:57
I had 2 Training Grounds in play and activated Ramosian Lieutenant's ability for 0.
- gos
- Posts: 4369
- Joined: 03 Mar 2011, 15:21
- Location: Reykjavík, Iceland
- Has thanked: 231 times
- Been thanked: 232 times
Re: Forge Release 09/29/2018 ver 1.6.16
by gos » 15 Oct 2018, 13:07
Gate to the Afterlife only searches your library for God-Pharaoh's Gift. I don't think this has ever worked properly.
- gos
- Posts: 4369
- Joined: 03 Mar 2011, 15:21
- Location: Reykjavík, Iceland
- Has thanked: 231 times
- Been thanked: 232 times
Re: Forge Release 09/29/2018 ver 1.6.16
by muppet » 15 Oct 2018, 13:28
In GRN drafts the split cards have draft rankings of 500 and thus are never picked.
Is there a way to manually change this number or do I have to wait for a fix?
Is there a way to manually change this number or do I have to wait for a fix?
Re: Forge Release 09/29/2018 ver 1.6.16
by soulwhisper » 20 Oct 2018, 06:10
Actually, you need to rename it "ConniveConcoct" to get picture.moush wrote:Forge only uses the first word as the name of the card, so "Connive".Utterly wrote:How do you rename the pictures of double sided cards like "Connive // Concoct" so they show up in forge?
- soulwhisper
- Posts: 1
- Joined: 20 Oct 2018, 04:08
- Has thanked: 0 time
- Been thanked: 0 time
75 posts
• Page 5 of 5 • 1, 2, 3, 4, 5
Who is online
Users browsing this forum: No registered users and 144 guests