Forge Beta: 02-08-2013 ver 1.3.8
Posted: 08 Feb 2013, 13:55Forge Beta: 02-08-2013 ver 1.3.8
(Quest icons used created by Teekatas, from his Legendora set http://raindropmemory.deviantart.com)
(Thanks to the MAGE team for permission to use their targeting arrows.)
(Thanks to http://www.freesound.org/browse/ for providing some sound files.)
12045 cards in total.
This version is primarily a maintenance release. When we built the 1.3.6 beta we noticed a bug and we were able to fix it fairly quickly. This resulted in the 1.3.7 beta release and we did not announce the 1.3.6 beta release as it was buggy.
After releasing the 1.3.7 beta we noticed several additional bugs and they have been fixed for the 1.3.8 beta. We also have several new cards and work on the deck editors continue.
--
On several occasions people have noticed that the forge deck editor and/or quest mode card shop would not open or display. We have also received reports that some of the tabs/panels in the deck editor are missing. Try deleting the file named "editor_preferred.xml" which is found in the "res/layouts" folder. This should force forge to then use the "editor_default.xml" file instead.
Several people have noticed that the cards displayed on the battlefield will fail to be displayed when the number of cards on the battlefield increases. Maximizing the human panel can help to re-display the cards.
Some time was spent turning the static ETB triggers into the proper ETB replacement effects they should be, mainly to interact correctly with each other. This work is not yet finished. As a result there is currently some inconsistencies with "Enters the battlefield with counters" (Not incredibly noticeable).
It seems like the front face of double faced cards aren't triggering properly, but the back face and single faced cards are.
A recent contribution to the code base should fix some of the bugs that people noticed with cloning type abilities. At this time there are two remaining issues that we hope will be addressed in the near future.
1. Leave play triggers don't work correct for clones.
2. Copies of cards that setup Zone Change triggers via addComesIntoPlayCommand and addLeavesPlayCommand will not function correctly.
We are now using a different system for our snapshot and beta releases. Unfortunately, this new system builds a jar file which does not accurately display the SVN revision number.
Forge is likely to be compatible with Java 7 at this time. Some people have used forge with Java 7 and have not reported any problems that are related to Java 7. If you would like to upgrade to Java 7 and have held off because of Forge then you may upgrade as we do not think that it will cause an incompatibility type of problem. We will continue to try to maintain compatibility with Java 6 for the foreseeable future.
--
The Forge archive includes a readme.txt file and we ask that you spend a few minutes reading this file as it contains some information that may prove useful. We do tend to update this file at times and you should quickly read this file and look for new information for each and every new release. Thank you.
The archive format used for the Forge distribution is ".tar.bz2". There are utilities for Windows, Mac OS and the various *nix's that can be used to extract/decompress these ".tar.bz2" archives. We recommend that you extract/decompress the Forge archive into a new and unused folder.
Some people use the Windows application 7zip. This utility can be found at http://www.7-zip.org/download.html. Mac users can double click on the archive and the application Archive Utility will launch and extract the archive. Mac users do not need to download a separate utility.
Many people helped with this version. A special thank you goes out to them. (Attempted to list names alphabetically):
Marc
Max
Myk
Nordos
Rooger
RumbleBBU
Sloth
Sol
Swordshine
Chris H
Added the following Vanguard Avatar:
Added the following Planes:
Added the following cards:
The links to the various archives:
(Quest icons used created by Teekatas, from his Legendora set http://raindropmemory.deviantart.com)
(Thanks to the MAGE team for permission to use their targeting arrows.)
(Thanks to http://www.freesound.org/browse/ for providing some sound files.)
12045 cards in total.
This version is primarily a maintenance release. When we built the 1.3.6 beta we noticed a bug and we were able to fix it fairly quickly. This resulted in the 1.3.7 beta release and we did not announce the 1.3.6 beta release as it was buggy.
After releasing the 1.3.7 beta we noticed several additional bugs and they have been fixed for the 1.3.8 beta. We also have several new cards and work on the deck editors continue.
--
On several occasions people have noticed that the forge deck editor and/or quest mode card shop would not open or display. We have also received reports that some of the tabs/panels in the deck editor are missing. Try deleting the file named "editor_preferred.xml" which is found in the "res/layouts" folder. This should force forge to then use the "editor_default.xml" file instead.
Several people have noticed that the cards displayed on the battlefield will fail to be displayed when the number of cards on the battlefield increases. Maximizing the human panel can help to re-display the cards.
Some time was spent turning the static ETB triggers into the proper ETB replacement effects they should be, mainly to interact correctly with each other. This work is not yet finished. As a result there is currently some inconsistencies with "Enters the battlefield with counters" (Not incredibly noticeable).
It seems like the front face of double faced cards aren't triggering properly, but the back face and single faced cards are.
A recent contribution to the code base should fix some of the bugs that people noticed with cloning type abilities. At this time there are two remaining issues that we hope will be addressed in the near future.
1. Leave play triggers don't work correct for clones.
2. Copies of cards that setup Zone Change triggers via addComesIntoPlayCommand and addLeavesPlayCommand will not function correctly.
We are now using a different system for our snapshot and beta releases. Unfortunately, this new system builds a jar file which does not accurately display the SVN revision number.
Forge is likely to be compatible with Java 7 at this time. Some people have used forge with Java 7 and have not reported any problems that are related to Java 7. If you would like to upgrade to Java 7 and have held off because of Forge then you may upgrade as we do not think that it will cause an incompatibility type of problem. We will continue to try to maintain compatibility with Java 6 for the foreseeable future.
--
The Forge archive includes a readme.txt file and we ask that you spend a few minutes reading this file as it contains some information that may prove useful. We do tend to update this file at times and you should quickly read this file and look for new information for each and every new release. Thank you.
The archive format used for the Forge distribution is ".tar.bz2". There are utilities for Windows, Mac OS and the various *nix's that can be used to extract/decompress these ".tar.bz2" archives. We recommend that you extract/decompress the Forge archive into a new and unused folder.
Some people use the Windows application 7zip. This utility can be found at http://www.7-zip.org/download.html. Mac users can double click on the archive and the application Archive Utility will launch and extract the archive. Mac users do not need to download a separate utility.
Many people helped with this version. A special thank you goes out to them. (Attempted to list names alphabetically):
Marc
Max
Myk
Nordos
Rooger
RumbleBBU
Sloth
Sol
Swordshine
Chris H
Added the following Vanguard Avatar:
- NEW VANGUARD AVATARS LIST | Open
Added the following Planes:
- NEW PLANES LIST | Open
Added the following cards:
- NEW CARD LIST | Open
The links to the various archives:
The Forge 02/08/2013 Windows and Linux archive (requires java 6):
forge-1.3.8.tar.bz2 (51.9 MB, at cardforge.org)
Forge 02/08/2013 BETA packaged as a Mac OS application:
forge-1.3.8-osx.tar.bz2 (53.1 MB, at cardforge.org)