Page 2 of 2

Re: Recent Standard Format Quest Worlds

PostPosted: 23 Apr 2018, 02:24
by goonjamin
I'm trying to get this to work but I can't figure out what I am doing wrong. I am using forge-gui-desktop-1.6.10-SNAPSHOT-r33.tar from earlier today.

I have setup the following:
C:\Users\Mike\AppData\Roaming\Forge\quest\customworlds.txt
C:\Users\Mike\AppData\Roaming\Forge\quest\worlds

I start up forge and go to start a new quest but the only starting worlds showing are the ones that forge comes with. None of the customs ones are listed?

All the folders for the worlds from this thread are in the worlds folder and this is my customworlds.txt file. Do you see what I have done wrong?

Code: Select all
Name:Aether Revolt|Dir:Aether_Revolt|Sets:KLD, AER, EMN, SOI, BFZ, OGW
Name:Kaladesh|Dir:kaladesh|Sets:KLD, AER, EMN, SOI, BFZ, OGW
Name:Avacyn|Dir:Avacyn_Restored|Sets:SOM, MBS, NPH, M12, ISD, DKA, AVR
Name:Battle for Zendikar|Dir:Battle_for_Zendikar|Sets:M15, KTK, FRF, DTK, ORI, BFZ
Name:Dark Ascension|Dir:Dark_Ascension|Sets:SOM, MBS, NPH, M12, ISD, DKA
Name:Dragons of Tarkir|Dir:Dragons_of_Tarkir|Sets:THS, BNG, JOU, M15, KTK, FRF, DTK
Name:Eldritch Moon|Dir:Eldritch_Moon|Sets:EMN, SOI, OGW, BFZ, ORI, DTK, KTK, FRF
Name:Zendikar_Standard|Dir:Standard_Zendikar|Sets:ALA, CFX, ARB, M10, ZEN
Name:Theros|Dir:Theros|Sets:JOU, BNG, THS, M14
Name:New_Phyrexia|Dir:New_Phyrexia|Sets:NPH, MBS, SOM, M11
Name:Shadows_Over_Innistrad|Dir:Shadows_Over_Innistrad|Sets:SOI, OGW, BFZ, ORI, DTK, KTK, FRF
Name:Oath_of_the_Gatewatch|Dir:Oath_of_the_Gatewatch|Sets:OGW, BFZ, ORI, KTK, DTK, FRF
Name:Born_of_the_Gods|Dir:Born_of_the_Gods|Sets:JOU, BNG, THS, M14
Name:Fate Reforged|Dir:Fate_Reforged|Sets:THS, BNG, JOU, M15, KTK, FRF
Name:Gatecrash|Dir:Gatecrash|Sets:ISD, DKA, AVR, M13, RTR, GTC
Name:Innistrad|Dir:Innistrad|Sets:SOM, MBS, NPH, M12, ISD
Name:Khans|Dir:Khans_of_Tarkir|Sets:THS, BNG, JOU, M15, KTK
Name:Origins|Dir:Magic_Origins|Sets:KTK, FRF, DTK, ORI
Name:Journey into Nyx|Dir:Journey_into_Nyx|Sets:RTR, GTC, DGM, M14, THS, BNG, JOU
Name:Scars of Mirrodin|Dir:Scars_of_Mirrodin|Sets:ZEN, WWK, ROE, M11, SOM
Name:Mirrodin Besieged|Dir:Mirrodin_Besieged|Sets:ZEN, WWK, ROE, M11, SOM, MBS
Name:Return to Ravnica|Dir:Return_to_Ravnica|Sets:ISD, DKA, AVR, M13, RTR
Name:Rise of the Eldrazi|Dir:Rise_of_the_Eldrazi|Sets:ALA, CFX, ARB, M10, ZEN, WWK, ROE
Name:Worldwake|Dir:Worldwake|Sets:ALA, CFX, ARB, M10, ZEN, WWK
Name:Ixalan|Dir:Ixalan|Sets:XLN, AKH, HOU, KLD, AER
Name:Dominaria|Dir:Dominaria|Sets:DOM, RIX, XLN, AKH, HOU, KLD, AER

Re: Recent Standard Format Quest Worlds

PostPosted: 23 Apr 2018, 05:44
by austinio7116
customworlds.txt file should be within the worlds folder, otherwise looks good.

Re: Recent Standard Format Quest Worlds

PostPosted: 23 Apr 2018, 06:49
by Agetian
Thanks for the effort, Austinio, this is nice! :)

Hmm, I wonder if, with the latest Commander deck generation advancements, a similar approach can be used to generate Commander (and possibly standard MTG) events for Planar Conquest to create new planes in a similar manner? We're missing the new ones (Ixalan, Dominaria), as well as some older ones (e.g. Kamigawa) that would be nice to have :/

- Agetian

Re: Recent Standard Format Quest Worlds

PostPosted: 23 Apr 2018, 06:51
by austinio7116
Nice idea, I'll take a look and see what's involved.

Re: Recent Standard Format Quest Worlds

PostPosted: 23 Apr 2018, 17:07
by goonjamin
austinio7116 wrote:customworlds.txt file should be within the worlds folder, otherwise looks good.
That is how I set it up the 1st time i tried but it didn't work either?

I just tried moving the file into the worlds folder on my Android install (version 1.69.001) but I still don't see them?

I'll try again tonight on my desktop computer and see if it works there.

Re: Recent Standard Format Quest Worlds

PostPosted: 23 Apr 2018, 19:01
by austinio7116
OK - I'm sure I managed to help someone get this working with these instructions: viewtopic.php?f=48&t=21676&p=222804&hilit=customworlds#p222804

I think that is what you are doing, but just in case I missed something..

Re: Recent Standard Format Quest Worlds

PostPosted: 23 Apr 2018, 22:11
by goonjamin
Those are the instructions I used. I still can't get it to work so I'm not sure what is wrong if it works for you?

Is the banned portion after the sets mandatory? I don't have that on mine.

Re: Recent Standard Format Quest Worlds

PostPosted: 23 Apr 2018, 22:39
by austinio7116
Yes it works for me, no banned is not required.

Re: Recent Standard Format Quest Worlds

PostPosted: 23 Apr 2018, 22:42
by austinio7116
Did you try the open user directory button to make sure you are looking at the right user folder?

Re: Recent Standard Format Quest Worlds

PostPosted: 23 Apr 2018, 23:27
by goonjamin
Yes, the open user directory takes me to C:\Users\Mike\AppData\Roaming\Forge.

I go into quest and that is where the worlds folder is. I have zipped up the worlds folder I am using, does this work on your system?

Could you try zipping your worlds folder and attaching here so I can try dropping it into my folder?

Re: Recent Standard Format Quest Worlds

PostPosted: 24 Apr 2018, 05:57
by austinio7116
OK - I found the issue - there was a mistake in those instructions - the folder should be called "world" not "worlds" - I have updated the instructions now.

Re: Recent Standard Format Quest Worlds

PostPosted: 24 Apr 2018, 11:42
by goonjamin
Success :D

Thanks for helping me out!

Re: Recent Standard Format Quest Worlds

PostPosted: 27 Apr 2018, 14:10
by Corwin72
So I recently updated my quest worlds with everything that I could find.

https://drive.google.com/open?id=1YvjbBNKP6cqlahdiaXI_HmH3Vu1prryN

You should just need to put the res directory in your forge directory and overwrite the existing files.