Collectible Card Game Headquarters

It looks like we have finished the spBounceTgt to AF_Bounce conversion. I commented out the spBounceTgt code block but did not delete it. I have not had a chance to see if there is any useful AI that has not yet been transferred.

I am not sure when Sol will feel that it is time to release the next beta. We may want to convert over some of the old cards before we do in order to give the user base more cards to test.

I am not sure where I should devote my attentions this next week.

I have two phase related issues right now that were recently reported. I'll take a look this week, but I think we might be ok to release one pretty soon.

I'm sure there are a few floating issues that just haven't been spotted yet, but probably aren't anything major. I only play on occasion but it's been pretty stable for me.

I am in the process of converting most of the spReturnTgt spells over to SP$Retrieve. I had these three cards ready for testing:

False Mourning
Reclaim
Salvage

and noticed that they did not work. I added Raise Dead to the test deck and re-tested and Raise Dead no longer works although it worked a day or two ago when I committed the conversion.

Many of the SP$Retrieve cards need to use "ValidTgts$ " restriction ".YouCtrl" or the cards that are in the computer's graveyard will also appear in the list of cards to select from.

It looks like some recent mods in r3566 at AbilityFactory_Fetch may have something to do with this situation. I could be wrong.

Retrieve doesn't use TopOfLibrary like Bounce does. It uses Destination$Library and LibraryPosition$0

Edit: And I don't know how to read properly. Hopefully this can be resolved soon

friarsol wrote:Retrieve doesn't use TopOfLibrary like Bounce does. It uses Destination$Library and LibraryPosition$0

Edit: And I don't know how to read properly. Hopefully this can be resolved soon

`
I found the Retrieve code in AbilityFactory_Fetch and discovered the Destination$Library and LibraryPosition$0.

The bug that I noticed was that I would click on the card to cast and I had valid targets in my graveyard and yet nothing would happen. No targeting or pay mana prompts. It acts like there are no valid targets in my graveyard.

I am sure that we will be able to get it fixed before we release the next beta.

This might be related to my big ValidCards change. Try again when I fixed the issues I've found with the restriction "Other".

EDIT: Fixed.

Sloth wrote:This might be related to my big ValidCards change. Try again when I fixed the issues I've found with the restriction "Other".

EDIT: Fixed.

`
Thank you Sloth. I re-ran my test deck and the SP$Retrieve cards are working again.

slapshot5 wrote:

Hellfish wrote:Having spaces there looks nice, but I'm not sure it should be enforced. So I'm in favor of the trim() approach.

agreed. Spaces could be allowed anywhere, so:

|Destination$Hand|
| Destination$Hand|
| Destination $Hand|
| Destination $ Hand|
| Destination $ Hand |

would all be equally valid.

`
I think that I have found all of the cards that use the AF sa's and have added spaces to them. The code that I added follows Slapshot's request and these are all allowed:

Code: Select all

|Key$Value|
| Key$Value|
| Key $Value|
| Key $ Value|
| Key $ Value |
|Key $ Value |
|Key$ Value |
|Key$Value |

`
I standardized on this format:

Code: Select all

| Key$ Value |

`
This keeps the $ attached to the key and helps to denote the fact that it is the key.

My previous code removed the trailing space character included in the PrecostDesc and the CostDesc. I just merged a fix to this.

I was in the process of converting some of the spDrawCards keyword-ed cards over to AF_Draw. While play testing Obsessive Search I decided to test the Madness ability. I had 8 cards in hand and waited till EOT. When I discarded Obsessive Search, I was prompted to pay the Madness cost U. I paid and this error exception was displayed.

The Obsessive Search card looks like this:

Code: Select all

Name:Obsessive Search
ManaCost:U
Types:Instant
Text:no text
A:SP$Draw | Cost$ U | NumCards$ 1 | SpellDescription$ Draw a card.
K:Madness:U
SVar:Rarity:Common
SVar:Picture:http://www.wizards.com/global/images/magic/general/obsessive_search.jpg
End

`
The error exception:

Code: Select all

An error has occured. You can copy/paste this message or save it to a file.
Please report this, plus what you tried to do, to:
   http://www.slightlymagic.net/forum/viewforum.php?f=26
If you don't want to register an account, you can mail it directly to
   mtgerror@yahoo.com


null


Version:
Forge -- official beta: $Date: 2010-09-14 08:34:27 -0400 (Tue, 14 Sep 2010) $, SVN revision: $Revision: 2039 $

OS: Mac OS X Version: 10.6.4 Architecture: x86_64

Java Version: 1.6.0_22 Vendor: Apple Inc.

Detailed error trace:
java.lang.NullPointerException
   at forge.SpellAbility_Requirements.fillRequirements(SpellAbility_Requirements.java:24)
   at forge.GameAction.playSpellAbilityForFree(GameAction.java:2801)
   at forge.GameAction.playCardNoCost(GameAction.java:2788)
   at forge.GameAction$2.resolve(GameAction.java:407)
   at forge.MagicStack.resolveStack(MagicStack.java:467)
   at forge.Phase.passPriority(Phase.java:570)
   at forge.ComputerAI_General.stackResponse(ComputerAI_General.java:278)
   at forge.ComputerAI_General.stack_not_empty(ComputerAI_General.java:243)
   at forge.InputControl.updateInput(InputControl.java:119)
   at forge.GuiInput.update(GuiInput.java:19)
   at java.util.Observable.notifyObservers(Observable.java:142)
   at java.util.Observable.notifyObservers(Observable.java:98)
   at forge.MyObservable.updateObservers(MyObservable.java:9)
   at forge.InputControl.resetInput(InputControl.java:32)
   at forge.Phase.passPriority(Phase.java:561)
   at forge.Input_PassPriority.selectButtonOK(Input_PassPriority.java:35)
   at forge.GuiInput.selectButtonOK(GuiInput.java:35)
   at forge.GuiDisplay3.okButtonActionPerformed(GuiDisplay3.java:1001)
   at forge.GuiDisplay3.access$3(GuiDisplay3.java:1000)
   at forge.GuiDisplay3$26.actionPerformed(GuiDisplay3.java:795)
   at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:2028)
   at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2351)
   at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
   at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
   at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
   at java.awt.Component.processMouseEvent(Component.java:6352)
   at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
   at java.awt.Component.processEvent(Component.java:6117)
   at java.awt.Container.processEvent(Container.java:2085)
   at java.awt.Component.dispatchEventImpl(Component.java:4714)
   at java.awt.Container.dispatchEventImpl(Container.java:2143)
   at java.awt.Component.dispatchEvent(Component.java:4544)
   at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4621)
   at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4282)
   at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4212)
   at java.awt.Container.dispatchEventImpl(Container.java:2129)
   at java.awt.Window.dispatchEventImpl(Window.java:2478)
   at java.awt.Component.dispatchEvent(Component.java:4544)
   at java.awt.EventQueue.dispatchEvent(EventQueue.java:635)
   at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:296)
   at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:211)
   at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:201)
   at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:196)
   at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:188)
   at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)


I don't want to submit this yet, cause I haven't tested it, but Chris try this and see if it works.

in SpellAbility_Requirements.fillRequirements() right near the top add this null check in between these lines:

Code: Select all

fromZone = AllZone.getZone(c);
if (fromZone != null)
    fromZone.remove(c);


I'll try to take a deeper look when I have some time if that doesn't seem to solve the problem.

friarsol wrote:I don't want to submit this yet, cause I haven't tested it, but Chris try this and see if it works.

`
Thank you Sol.

I think that I may wait until tomorrow to try this out. It has been a long day and I am starting to tire. And I have a few more cards to test tonight and I will try to merge them before calling it a night.

I don't want to submit this yet, cause I haven't tested it, but Chris try this and see if it works.

`
I see that you found the opportunity to add the fix to the SVN, thank you.

I cast a Compulsive Research and targeted the computer. The computer draws 3 cards but I have to discard 2 cards unless I discard a land. I am seeing a similar problem with Wistful Thinking and Sign in Blood. Recent changes in the targeting or subAbility code might have something to do with this.

Code: Select all

Name:Compulsive Research
ManaCost:2 U
Types:Sorcery
Text:no text
A:SP$Draw | Cost$ 2 U | NumCards$ 3 | ValidTgts$ Player | TgtPrompt$ Choose a player to draw three cards. Then that player discards two cards unless he or she discards a land card | SpellDescription$ Target player draws three cards. Then that player discards two cards unless he or she discards a land card | SubAbility$ TgtDiscard/2/UnlessDiscardType.Land
SVar:Rarity:Common
SVar:Picture:http://www.wizards.com/global/images/magic/general/compulsive_research.jpg
End

Name:Wistful Thinking
ManaCost:2 U
Types:Sorcery
Text:no text
A:SP$Draw | Cost$ 2 U | NumCards$ 2 | ValidTgts$ Player | TgtPrompt$ Choose a player to draw two cards, then discards four cards | SpellDescription$ Target player draws two cards, then discards four cards. | SubAbility$ TgtDiscard/4
SVar:RemAIDeck:True
SVar:Rarity:Common
SVar:Picture:http://www.wizards.com/global/images/magic/general/wistful_thinking.jpg
End

Name:Sign in Blood
ManaCost:B B
Types:Sorcery
Text:no text
A:SP$Draw | Cost$ B B | NumCards$ 2 | ValidTgts$ Player | TgtPrompt$ Choose a player to draw two cards and lose 2 life | SpellDescription$ Target player draws two cards and loses 2 life. | SubAbility$ LoseLifeTgt/2
SVar:Rarity:Common
SVar:Picture:http://www.wizards.com/global/images/magic/general/sign_in_blood.jpg
End

The right info wasn't being sent in to the old drawback code. I just submitted a fix that will send in the Targeted player to Drawback and tested with Sign in Blood. I'm guessing that'd do the trick for the rest.

My long term solution is converting Drawback to new SubAbility stuff (once they are ready)

Hooray! Doesn't everyone love converting things?