Bug Reports XMage 1.4.33 SOFTWARE
by BetaSteward
Moderators: North, BetaSteward, noxx, jeffwadsworth, JayDi, TheElk801, LevelX, CCGHQ Admins
Re: Bug Reports XMage 1.4.33 SOFTWARE
by IcyJay » 18 Jan 2019, 05:45
Since when is that a thing?Dynamo345 wrote:connect to the server then open it
Works fine
Thank you.
Re: Bug Reports XMage 1.4.33 SOFTWARE
by JayDi » 18 Jan 2019, 08:17
Try to use ipv4 fixes from that reddit topic. It's must help.DaytonaYT wrote:I'm not sure if it's been reported on at all, but the deck editor doesn't seem to work. It won't load the card database and let me change out cards, I can only use the "addLands" function. Is this a program issue or something I've missed? I've tried force-updating the card DB during connection and it didn't work.
-
JayDi - Posts: 324
- Joined: 23 Nov 2017, 15:41
- Location: Russia
- Has thanked: 0 time
- Been thanked: 48 times
Re: Bug Reports XMage 1.4.33 SOFTWARE
by Zerris » 18 Jan 2019, 18:59
Enhancement Request: Daretti, Ingenious Iconoclast could use clarity in the ability text / help text for using his -1.
Specifically, the ability says "You may sacrifice an artifact. If you do, destroy target artifact or creature. However, because this is a reflexive trigger, you pick the second target first before deciding whether to sacrifice an artifact (and if so, which one). This makes it very easy to mistakenly select the artifact you want to sacrifice first (because it's logically the first part of the ability you read) - except this is also a valid target to destroy, and after selecting it there's no way to back up or target something else.
I'd like one or more of the following:
1) A much clearer description that makes it obvious the first target is the thing you want to destroy
2) A way to back up after selecting a target - i.e. a "cancel" button that rolls back to before you selected the -1 ability.
3) An "include own permanents as options to destroy" effect similar to Teferi's +1 delayed trigger, to make it obvious that you're doing something a little unexepected.
...because so far I've played Daretti in four games, and I've accidentally targeted my own artifact to destroy in three of them.
Also, although I haven't played with it, I'd expect Heart-Piercer Manticore to have the same issue. As far as I can tell, these are the only two cards with reflexive sacrifice triggers where both the sacrificed permanent and the target permanent can be of the same type.
Specifically, the ability says "You may sacrifice an artifact. If you do, destroy target artifact or creature. However, because this is a reflexive trigger, you pick the second target first before deciding whether to sacrifice an artifact (and if so, which one). This makes it very easy to mistakenly select the artifact you want to sacrifice first (because it's logically the first part of the ability you read) - except this is also a valid target to destroy, and after selecting it there's no way to back up or target something else.
I'd like one or more of the following:
1) A much clearer description that makes it obvious the first target is the thing you want to destroy
2) A way to back up after selecting a target - i.e. a "cancel" button that rolls back to before you selected the -1 ability.
3) An "include own permanents as options to destroy" effect similar to Teferi's +1 delayed trigger, to make it obvious that you're doing something a little unexepected.
...because so far I've played Daretti in four games, and I've accidentally targeted my own artifact to destroy in three of them.
Also, although I haven't played with it, I'd expect Heart-Piercer Manticore to have the same issue. As far as I can tell, these are the only two cards with reflexive sacrifice triggers where both the sacrificed permanent and the target permanent can be of the same type.
Re: Bug Reports XMage 1.4.33 SOFTWARE
by TheElk801 » 18 Jan 2019, 19:12
Daretti doesn't have a reflexive trigger, if he did it would say "when you do" and not "if you do". You select the target when you activate the ability and you sacrifice the artifact when it resolves. Cards like Heart-Piercer Manticore don't have these issues.
I've updated the targeting wording to make it more clear that it's going to be destroyed.
I've updated the targeting wording to make it more clear that it's going to be destroyed.
Angelic Voices not working properly
by Tharkon » 19 Jan 2019, 20:43
Angelic Voices does not seem to work properly with the following cards, my guess it is because they are tokens.
The only spells I have played are Animation Module, Angelic Voices and Legion's Landing.
The AI has not played any spells.
The only creature in play is a 1/1 white vampire creature token with lifelink.
Other permanents in play on my side are Legion's Landing, Animation Module, Angelic Voices, 4x Plains
And on the AI's side 1x Forest (The AI must have had a terrible hand.)
EDIT: It also does not work with Gather the Townsfolk.
LevelX: Fixed beyond 1.4.33V0.
The only spells I have played are Animation Module, Angelic Voices and Legion's Landing.
The AI has not played any spells.
The only creature in play is a 1/1 white vampire creature token with lifelink.
Other permanents in play on my side are Legion's Landing, Animation Module, Angelic Voices, 4x Plains
And on the AI's side 1x Forest (The AI must have had a terrible hand.)
EDIT: It also does not work with Gather the Townsfolk.
LevelX: Fixed beyond 1.4.33V0.
- Tharkon
- Posts: 49
- Joined: 19 Jan 2019, 20:37
- Has thanked: 0 time
- Been thanked: 0 time
Re: Bug Reports XMage 1.4.33 SOFTWARE
by BrassAngel42 » 19 Jan 2019, 23:40
Vengeful Dreams eats the card but doesn't exile the attacker (Angelic Protector).
LevelX: Fixed beyond 1.4.33V0.
LevelX: Fixed beyond 1.4.33V0.
- BrassAngel42
- Posts: 44
- Joined: 04 Jun 2017, 18:07
- Has thanked: 1 time
- Been thanked: 0 time
Re: Bug Reports XMage 1.4.33 SOFTWARE
by BrassAngel42 » 20 Jan 2019, 04:58
The computer like to tap/untap Basalt Monolith during the instant phase of combat and it doesn't stop.
Think of the AI player as a really dumb buddy.
Think of the AI player as a really dumb buddy.
- BrassAngel42
- Posts: 44
- Joined: 04 Jun 2017, 18:07
- Has thanked: 1 time
- Been thanked: 0 time
Re: Bug Reports XMage 1.4.33 SOFTWARE
by Rainheart » 20 Jan 2019, 18:00
So release it asap? It's a relevant card, especially with the release of the new set.
Thanks for the encouragement; I will pass your suggestion along.
- Rainheart
- Posts: 40
- Joined: 21 Aug 2015, 16:58
- Has thanked: 0 time
- Been thanked: 0 time
Re: Bug Reports XMage 1.4.33 SOFTWARE
by MalcolmS » 20 Jan 2019, 19:59
Domri, Chaos Bringer's +1 ability seems to give double riot instead of 1 instance of riot:
20:56: Malcolm activates: Add or . If that mana is spent on a creature spell, it gains riot. from Domri, Chaos Bringer [c55]
20:56: Malcolm casts Dagger Caster [d1a]
20:56: Ability triggers: Domri, Chaos Bringer [c55] - spell you cast have Riot (This creature enters the battlefield with your choice of a +1/+1 counter or haste.).
20:56: Ability triggers: Domri, Chaos Bringer [c55] - spell you cast have Riot (This creature enters the battlefield with your choice of a +1/+1 counter or haste.).
Fixed beyond 1.4.33V0.
20:56: Malcolm activates: Add or . If that mana is spent on a creature spell, it gains riot. from Domri, Chaos Bringer [c55]
20:56: Malcolm casts Dagger Caster [d1a]
20:56: Ability triggers: Domri, Chaos Bringer [c55] - spell you cast have Riot (This creature enters the battlefield with your choice of a +1/+1 counter or haste.).
20:56: Ability triggers: Domri, Chaos Bringer [c55] - spell you cast have Riot (This creature enters the battlefield with your choice of a +1/+1 counter or haste.).
Fixed beyond 1.4.33V0.
Re: Bug Reports XMage 1.4.33 SOFTWARE
by petey0228 » 21 Jan 2019, 04:36
Hi so every time I try to connect to any server it cannot connect and the localhost doesn't work at all.Ive tried deleting every trace and then reinstalling but nothing is working.
- petey0228
- Posts: 4
- Joined: 21 Jan 2019, 04:32
- Has thanked: 0 time
- Been thanked: 0 time
Re: Bug Reports XMage 1.4.33 SOFTWARE
by JayDi » 21 Jan 2019, 06:15
User that github TODO list and instructions to fix localhost (but FIRST go to xmage preferences window and checks proxy tab -- it's must be empty):petey0228 wrote:Hi so every time I try to connect to any server it cannot connect and the localhost doesn't work at all.Ive tried deleting every trace and then reinstalling but nothing is working.
-
JayDi - Posts: 324
- Joined: 23 Nov 2017, 15:41
- Location: Russia
- Has thanked: 0 time
- Been thanked: 48 times
Re: Bug Reports XMage 1.4.33 SOFTWARE
by petey0228 » 21 Jan 2019, 14:47
I tried to read those instructions and they made no sense to me. I am not too familiar with code.
- petey0228
- Posts: 4
- Joined: 21 Jan 2019, 04:32
- Has thanked: 0 time
- Been thanked: 0 time
Re: Bug Reports XMage 1.4.33 SOFTWARE
by petey0228 » 21 Jan 2019, 14:53
what do i check off in the proxy box Socks or HTTP
- petey0228
- Posts: 4
- Joined: 21 Jan 2019, 04:32
- Has thanked: 0 time
- Been thanked: 0 time
Re: Bug Reports XMage 1.4.33 SOFTWARE
by petey0228 » 21 Jan 2019, 14:59
it says can't connect and no server state up top. I can usually keep hitting connect until I force my way through to the server. I've never had this problem until RNA was released since the update on 1/16. Someone please help
- petey0228
- Posts: 4
- Joined: 21 Jan 2019, 04:32
- Has thanked: 0 time
- Been thanked: 0 time
Re: Bug Reports XMage 1.4.33 SOFTWARE
by JayDi » 21 Jan 2019, 21:05
You must select "none" to disable proxy.petey0228 wrote:what do i check off in the proxy box Socks or HTTP
-
JayDi - Posts: 324
- Joined: 23 Nov 2017, 15:41
- Location: Russia
- Has thanked: 0 time
- Been thanked: 48 times
Who is online
Users browsing this forum: No registered users and 188 guests