Page 3 of 5

Re: Bug Reports xmage 1.4.8

PostPosted: 02 Feb 2016, 09:55
by Hintelijente
Apparently a "cheating" program has been running for a couple days, allowing players to order their library and decide draws, see opps hand and order opps library...

Please, do WHATEVER IT TAKES to shut it down or all the effort you did with this will be for naught.

LevelX: I don't think that this is technically possible. The library order is only available on the server and there are no access possibilities to change that order from outside the game thread itself. Why do you think that this kind of "cheating" does happen?

Re: Bug Reports xmage 1.4.8

PostPosted: 03 Feb 2016, 12:11
by I3ryI3e
I had a bug with Eldrazi Obligator where i cast it but i don't want to use his ability so i choose the creature but when it asks me if i want to pay the cost i choose cancel, so i don't take control of the creature but for some reason the creature still gets untapped..

Re: Bug Reports xmage 1.4.8

PostPosted: 03 Feb 2016, 23:40
by bhamann82
for some reason i cannot download all the image files. says image not available

Re: Bug Reports xmage 1.4.8

PostPosted: 03 Feb 2016, 23:48
by Ravine
Counterspell is currently implemented as Modern-legal when it should not be. I was playing a match of Modern against someone who had Counterspell in their deck. I think the specific printing that they were using was from Ice Age. I have attached an image of the game with Counterspell.

Re: Bug Reports xmage 1.4.8

PostPosted: 04 Feb 2016, 20:27
by fireshoes
Here's a screencap of the reconnect problem I mentioned the other day. The connect was lost, but the client was frozen instead of going through reconnect dialog. I killed the process, restarted the client via launcher, and rejoined the server. It took me automatically back to the match I was in but the connect dialog was up at that point. I clicked cancel and and was able to do normal game functions at that point, but other times when this occurs, clicking cancel will cause you to disconnect and quit the match.

Re: Bug Reports xmage 1.4.8

PostPosted: 04 Feb 2016, 22:08
by Laqutis
didn't have any problems connecting my home computers till this last update now when trying to connect 2 computers on my home network i get the following error in the client log

| Open
FATAL 2016-02-04 16:58:48,683 =>[SwingWorker-pool-4-thread-9] SessionImpl.handleRemotingTaskExceptions
java.net.UnknownHostException: mike
at java.net.AbstractPlainSocketImpl.connect(Unknown Source)
at java.net.PlainSocketImpl.connect(Unknown Source)
at java.net.SocksSocketImpl.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at java.net.Socket.<init>(Unknown Source)
at java.net.Socket.<init>(Unknown Source)
at org.jboss.remoting.transport.bisocket.BisocketServerInvoker$2.run(BisocketServerInvoker.java:403)
at java.security.AccessController.doPrivileged(Native Method)
at org.jboss.remoting.transport.bisocket.BisocketServerInvoker.createControlConnection(BisocketServerInvoker.java:395)
at org.jboss.remoting.transport.bisocket.BisocketClientInvoker.transport(BisocketClientInvoker.java:459)
at org.jboss.remoting.MicroRemoteClientInvoker.invoke(MicroRemoteClientInvoker.java:169)
at org.jboss.remoting.Client.invoke(Client.java:2084)
at org.jboss.remoting.Client.addCallbackListener(Client.java:2153)
at org.jboss.remoting.Client.addListener(Client.java:1258)
at org.jboss.remoting.Client.addListener(Client.java:1144)
at org.jboss.remoting.Client.addListener(Client.java:1127)
at mage.remote.SessionImpl$5.run(SessionImpl.java:410)
at mage.remote.SessionImpl.handleRemotingTaskExceptions(SessionImpl.java:136)
at mage.remote.SessionImpl.establishJBossRemotingConnection(SessionImpl.java:281)
at mage.remote.SessionImpl.connect(SessionImpl.java:239)
at mage.client.MageFrame.connect(MageFrame.java:730)
at mage.client.dialog.ConnectDialog$ConnectTask.doInBackground(ConnectDialog.java:410)
at mage.client.dialog.ConnectDialog$ConnectTask.doInBackground(ConnectDialog.java:400)
at javax.swing.SwingWorker$1.call(Unknown Source)
at java.util.concurrent.FutureTask.run(Unknown Source)
at javax.swing.SwingWorker.run(Unknown Source)
at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
INFO 2016-02-04 16:58:48,683 DISCONNECT (still connected) =>[SwingWorker-pool-4-thread-9] SessionImpl.disconnect
INFO 2016-02-04 16:58:48,698 Disconnected ... =>[SwingWorker-pool-4-thread-9] SessionImpl.disconnect
INFO 2016-02-04 16:58:48,698 DISCONNECTED (NO Event Dispatch Thread) =>[SwingWorker-pool-4-thread-9] MageFrame.disconnected

not sure what has changed but i would like to be able to connect the computers again. whenever i try to connect the computers i get a message box that simply states the computers name that is running the host server and nothing more.
thanks for any help / incites on getting this working again

Re: Bug Reports xmage 1.4.8

PostPosted: 06 Feb 2016, 11:32
by booot
Support Ability can target its source.
Its cannot really.

LevelX: Can't reproduce that problem. With which card you had that problem?

Re: Bug Reports xmage 1.4.8

PostPosted: 06 Feb 2016, 11:34
by booot
Roiling Waters - last sentence is not really cards and oracle.

LevelX: Fixed beyond 1.4.8v1

And Opponent AI targets me.

Re: Bug Reports xmage 1.4.8

PostPosted: 06 Feb 2016, 18:32
by booot
1)Touch of the Void cast to Dorana Mirrorpool copy of that to other creature.
Watcher still see Dorana copy of Touch of the Void, original resolved, exile ability doubled.

LevelX: Sorry I don't get your explanation. Can you explain it bit more accurate what happened or what should have happened? What does Dorana or Watcher mean?

2)I can cast Pulse of Murasa while I has not my graveyard creature or land cards.

LevelX: Probably because another player has a creature or land card in his graveyard.

Re: Bug Reports xmage 1.4.8

PostPosted: 07 Feb 2016, 12:55
by BenjaMean85
In my last game i tried to redirect the -3 ability of Karn Liberated (which was targeting my Animar, Soul of Elements Commander)by turning Willbender face up - nothing happened. The trigger didn´t even show up. Shouldn´t I be able to Redirect it to himself for example?

LevelX: Fixed beyond 1.4.8v1

Re: Bug Reports xmage 1.4.8

PostPosted: 08 Feb 2016, 00:09
by Iroald
When you mouse over Dust to Dust, it reads "Exile target artifact.", when it should be "Exile two target artifacts." The card works as intended, but it gives an incorrect prompt like that.

LevelX: Fixed beyond 1.4.8v1

Re: Bug Reports xmage 1.4.8

PostPosted: 08 Feb 2016, 03:20
by QuoVadis
Elder Mastery is broken. it should be on all damage, not just combat damage. it should be much better in a nekusar deck then it is.

LevelX: Fixed beyond 1.4.8v1

Re: Bug Reports xmage 1.4.8

PostPosted: 08 Feb 2016, 16:32
by booot
<<1 Mirrorpool and Touch of the Void effect double, Sorry, my server log not have any sentence, and my computer not repeat that case.
I'm searching more information for that.

<<2 Sorry that case may an opponent have.

Another, Mayael's Aria first effect puts a +1/+1 counter on only creatures with power 5 or greater.
It's effect checks creature controls with power 5 or greater but put a counter on each creature.

LevelX: Fixed beyond 1.4.8v1

Re: Bug Reports xmage 1.4.8

PostPosted: 08 Feb 2016, 16:59
by Doctor Weird
LevelX wrote:LevelX: Willbender's ability can only change the target of spells. It can't change the target of activated abilities.
Willbender:

"When Willbender is turned face up, change the target of target spell or ability with a single target."

Redirect (the instant) is the one that can only redirect spells and not abilities.

LevelX: Thanks for pointing out.

Re: Bug Reports xmage 1.4.8

PostPosted: 09 Feb 2016, 03:14
by GracefulDave
Voltaic Construct's image reads -

2: Untap target artifact

and should be

2: Untap target artifact creature.