Bug Reports XMage 1.4.32 SOFTWARE
by BetaSteward
Moderators: North, BetaSteward, noxx, jeffwadsworth, JayDi, TheElk801, LevelX, CCGHQ Admins
Re: Bug Reports XMage 1.4.32 SOFTWARE
by Nemo » 17 Dec 2018, 14:01
I'm getting this when trying to connect to local host.
- Nemo
- Posts: 2
- Joined: 17 Dec 2018, 13:59
- Has thanked: 0 time
- Been thanked: 0 time
Re: Bug Reports XMage 1.4.32 SOFTWARE
by JayDi » 17 Dec 2018, 14:04
Your server files is old. Close all java apps (or restart machine), run launcher and press update button (to download updates again).Nemo wrote:I'm getting this when trying to connect to local host.
-
JayDi - Posts: 324
- Joined: 23 Nov 2017, 15:41
- Location: Russia
- Has thanked: 0 time
- Been thanked: 48 times
Re: Bug Reports XMage 1.4.32 SOFTWARE
by cheddarsuave » 17 Dec 2018, 20:49
When casting/resolving Fact or Fiction (and similar cards I'm sure), there's a good chance the client will prevent you from picking a pile. The original pop-up blocks the "choose pile" popup, and it's impossible to move the top one out of the way. See attached pic.
I was completely stuck at this moment and they only way I could get back into the game was to open a new XMage window entirely.
LevelX: Can't reproduce this problem. The stack window is always in front. And the window showing all cards is just shown after the selection of a pile. So any special conditions here? (Mac?)
I was completely stuck at this moment and they only way I could get back into the game was to open a new XMage window entirely.
LevelX: Can't reproduce this problem. The stack window is always in front. And the window showing all cards is just shown after the selection of a pile. So any special conditions here? (Mac?)
- cheddarsuave
- Posts: 174
- Joined: 12 Sep 2016, 00:18
- Has thanked: 86 times
- Been thanked: 6 times
Re: Bug Reports XMage 1.4.32 SOFTWARE
by Miryafa » 19 Dec 2018, 04:30
1. I cast Animate Dead on a Phyrexian Revoker in the opp's graveyard, and when the Revoker textbox came up I couldn't name anything because it was blank.
2. I drafted a cube deck and after every match during sideboarding I got this message that the cards in my deck couldn't be found, so I couldn't submit my deck (even though all the cards worked during games)
2. I drafted a cube deck and after every match during sideboarding I got this message that the cards in my deck couldn't be found, so I couldn't submit my deck (even though all the cards worked during games)
- Miryafa
- Posts: 11
- Joined: 25 Jan 2016, 04:00
- Has thanked: 0 time
- Been thanked: 0 time
Re: Bug Reports XMage 1.4.32 SOFTWARE
by aesdwq » 20 Dec 2018, 01:47
Playing against AI
When Blood Sun is on the battlefield, tap lands, such as Boros Guildgate, are still coming into play tapped.
https://github.com/magefree/mage/issues/4202
When Blood Sun is on the battlefield, tap lands, such as Boros Guildgate, are still coming into play tapped.
https://github.com/magefree/mage/issues/4202
- aesdwq
- Posts: 1
- Joined: 20 Dec 2018, 01:41
- Has thanked: 0 time
- Been thanked: 0 time
Re: Bug Reports XMage 1.4.32 SOFTWARE
by illuknisaa » 20 Dec 2018, 09:21
I controlled both Seedborn Muse and Mist of Stagnation and I still was able to untap all my permanents during opponents turns. Mist makes people skip untaps so seedborn type effects should not do anything.
EDIT: I'm retarded.
EDIT: I'm retarded.
- illuknisaa
- Posts: 112
- Joined: 20 Apr 2017, 20:11
- Has thanked: 0 time
- Been thanked: 4 times
Re: Bug Reports XMage 1.4.32 SOFTWARE
by Rainheart » 21 Dec 2018, 15:59
You can't use replicate ability while flashbacking stuff from gy. At the very least there's a bug with Snapcaster Mage and Gigadrowse.
https://github.com/magefree/mage/issues/5389
https://github.com/magefree/mage/issues/5389
- Rainheart
- Posts: 40
- Joined: 21 Aug 2015, 16:58
- Has thanked: 0 time
- Been thanked: 0 time
Re: Bug Reports XMage 1.4.32 SOFTWARE
by Zerris » 23 Dec 2018, 16:26
When you have multiple copies of As Foretold in play, it doesn't tell you which you're using for each alternate cast spell - this is a major problem if you're on different numbers of counters and need to cast each spell with the right copy of As Foretold.
https://github.com/magefree/mage/issues/5480
https://github.com/magefree/mage/issues/5480
Re: Bug Reports XMage 1.4.32 SOFTWARE
by Zerris » 23 Dec 2018, 19:36
LevelX: I'm not sure if your rule interpretation is correct. Do you have a link where this specific interaction is explained?
Zerris: I am incorrect.
Last edited by Zerris on 04 Jan 2019, 05:45, edited 1 time in total.
Re: Bug Reports XMage 1.4.32 SOFTWARE
by Nemo » 24 Dec 2018, 03:38
Just wanted to say thanks. I'm able to get it running now.JayDi wrote:Your server files is old. Close all java apps (or restart machine), run launcher and press update button (to download updates again).Nemo wrote:I'm getting this when trying to connect to local host.
- Nemo
- Posts: 2
- Joined: 17 Dec 2018, 13:59
- Has thanked: 0 time
- Been thanked: 0 time
Re: Bug Reports XMage 1.4.32 SOFTWARE
by miguelaup » 27 Dec 2018, 20:10
Mistveil Plains doesn't work.
I tried to use it during my upkeep to put a card on the bottom of my library but nothing happened.
Do you have a log of the game?
I tried to use it during my upkeep to put a card on the bottom of my library but nothing happened.
Do you have a log of the game?
- miguelaup
- Posts: 3
- Joined: 21 Apr 2018, 19:22
- Has thanked: 0 time
- Been thanked: 0 time
Re: Bug Reports XMage 1.4.32 SOFTWARE
by DearDeer » 28 Dec 2018, 21:10
Hello I saw on forum that UMA set was realeased in 1.4.32. I have uptaded with the launcher to 1.4.32V1OLD and it says that this is the latest update but when I launch client the server is 1.4.31V4 where the latest set is Guilds of Ravnica. How can I play with UMA?
Re: Bug Reports XMage 1.4.32 SOFTWARE
by JayDi » 29 Dec 2018, 09:57
You can't do that on de-server, wait next release. But you can do that on BETA server (UMA, RNA cards and other new features with AI):DearDeer wrote:Hello I saw on forum that UMA set was realeased in 1.4.32. I have uptaded with the launcher to 1.4.32V1OLD and it says that this is the latest update but when I launch client the server is 1.4.31V4 where the latest set is Guilds of Ravnica. How can I play with UMA?
http://xmage.today/
-
JayDi - Posts: 324
- Joined: 23 Nov 2017, 15:41
- Location: Russia
- Has thanked: 0 time
- Been thanked: 48 times
Re: Bug Reports XMage 1.4.32 SOFTWARE
by Ender241 » 29 Dec 2018, 12:02
Hello,
1. I've had this problem when using scroll rack. Don't know why cause I play scrollrack without problem since many days.
https://drive.google.com/file/d/1G3O5ejzkBVvmLTqBWlZmEZeNmMCTVPKl/view?usp=sharing
2. I've had this other problem, versus a snapcaster mage + chain of vapor.
Opponent snap on chain of vapor, I sacrifice a land to copy CoV, choose a target, but the target doesn't come back to hand.(maybe game consider CoV is exiled so can't be copied, which is an error).
https://drive.google.com/file/d/1hZizwPXon4b1PJUODFW-5M0uocbSEM1l/view?usp=sharing
Thank you for your time.
1. I've had this problem when using scroll rack. Don't know why cause I play scrollrack without problem since many days.
https://drive.google.com/file/d/1G3O5ejzkBVvmLTqBWlZmEZeNmMCTVPKl/view?usp=sharing
2. I've had this other problem, versus a snapcaster mage + chain of vapor.
Opponent snap on chain of vapor, I sacrifice a land to copy CoV, choose a target, but the target doesn't come back to hand.(maybe game consider CoV is exiled so can't be copied, which is an error).
https://drive.google.com/file/d/1hZizwPXon4b1PJUODFW-5M0uocbSEM1l/view?usp=sharing
Thank you for your time.
Re: Bug Reports XMage 1.4.32 SOFTWARE
by JayDi » 29 Dec 2018, 12:13
It's must be library window to select, but it's too big...Ender241 wrote:Hello,
I've had this problem when using scrollrack. Don't know why cause I play scrollrack without problem since many days.
https://drive.google.com/file/d/1G3O5ejzkBVvmLTqBWlZmEZeNmMCTVPKl/view?usp=sharing
1. Try to check game logs for errors (black window).
2. If no errors then try to open library by icon under avatar.
3. If that's not working too then you can try to reset xmage settings to default (instructions -- delete HKEY_CURRENT_USER\Software\JavaSoft\Prefs\mage\client).
-
JayDi - Posts: 324
- Joined: 23 Nov 2017, 15:41
- Location: Russia
- Has thanked: 0 time
- Been thanked: 48 times
Who is online
Users browsing this forum: No registered users and 138 guests