Forge Beta: 11-05-2015 ver 1.5.47
Moderators: timmermac, Blacksmith, KrazyTheFox, Agetian, friarsol, CCGHQ Admins
Re: Forge Beta: 11-05-2015 ver 1.5.47
by Hackworth » 11 Jan 2016, 22:43
Ah yes, sorry, that was a misclick then.
- Hackworth
- Posts: 3
- Joined: 06 Jan 2016, 09:23
- Has thanked: 0 time
- Been thanked: 0 time
Re: Forge Beta: 11-05-2015 ver 1.5.47
by Nekoatl » 12 Jan 2016, 08:17
Have you tried using the combat tab to identify attackers and blockers? I sometimes find it helpful when my board gets so crowded that it becomes hard to tell exactly which cards in a stack the arrows are pointing at. Hovering over a card shows the exact number in the card detail panel, so I can be 100% sure that I'm clicking on the right card that way.lefty wrote:If the non-host is attacking, they dont see any kind of indication at all for which, if any, any opposing cards are blocking (no arrows or even shield icon.) This obviously has a negative impact for the non-host player that can't see, since casting instants to respond to specific blockers is a pretty crucial gameplay mechanic.
Re: Forge Beta: 11-05-2015 ver 1.5.47
by lefty » 12 Jan 2016, 16:07
I'll give that a try for now, thanks!Nekoatl wrote:Have you tried using the combat tab to identify attackers and blockers? I sometimes find it helpful when my board gets so crowded that it becomes hard to tell exactly which cards in a stack the arrows are pointing at. Hovering over a card shows the exact number in the card detail panel, so I can be 100% sure that I'm clicking on the right card that way.lefty wrote:If the non-host is attacking, they dont see any kind of indication at all for which, if any, any opposing cards are blocking (no arrows or even shield icon.) This obviously has a negative impact for the non-host player that can't see, since casting instants to respond to specific blockers is a pretty crucial gameplay mechanic.
Re: Forge Beta: 11-05-2015 ver 1.5.47
by Djebb » 12 Jan 2016, 18:11
Chandra's fury deals damage to all the creatures on the battlefield (not only my opp's ones)
Dark petition adds BBB even if my graveyard is empty.
Dark petition adds BBB even if my graveyard is empty.
Re: Forge Beta: 11-05-2015 ver 1.5.47
by leshrac » 14 Jan 2016, 04:23
Basically in every Gauntlet i try after every match i get this:
- IllegalStateException | Open
Re: Forge Beta: 11-05-2015 ver 1.5.47
by Marek14 » 14 Jan 2016, 21:49
BTW, when posting new updates, would it be possible to separate the cards from new sets from newly added old cards? The old cards, when any, get easily overlooked in the plethora of new ones.
Re: Forge Beta: 11-05-2015 ver 1.5.47
by dragynrain » 18 Jan 2016, 09:14
Description: I started a Quest game against Radagast and the game crashed.
Now whenever I try to launch Forge it crashes with an error.
I'm trying to use the error reporting feature from within Forge but when I try to post the generated text it says "Your post looks too spamy for a new user, please remove off-site URLs."
There are no off-site URL's, it's just the error report generated by Forge.
Not sure how I can post my error report.
Error: java lang RuntimeException: java io EOFException: Unexpected end of ZLIB input stream
Is my quest lost forever at this point???
EDIT: I found where the quest saves are stored and found the BAK backup of my save, and it seems to be fine. Hooray! Thank-you to whoever implemented automatic save backups.
Now whenever I try to launch Forge it crashes with an error.
I'm trying to use the error reporting feature from within Forge but when I try to post the generated text it says "Your post looks too spamy for a new user, please remove off-site URLs."
There are no off-site URL's, it's just the error report generated by Forge.
Not sure how I can post my error report.
Error: java lang RuntimeException: java io EOFException: Unexpected end of ZLIB input stream
Is my quest lost forever at this point???
EDIT: I found where the quest saves are stored and found the BAK backup of my save, and it seems to be fine. Hooray! Thank-you to whoever implemented automatic save backups.
- dragynrain
- Posts: 1
- Joined: 18 Jan 2016, 09:07
- Has thanked: 0 time
- Been thanked: 0 time
Re: Forge Beta: 11-05-2015 ver 1.5.47
by slyfox7777777 » 18 Jan 2016, 22:03
Before I say this, I am actually using snapshot 1.5.48 r30408 but I don't think there is a thread for 1.5.48 yet, or at least I can't find it, so I'm going to post this problem here.
I'm having a problem with Lys Alana Huntmaster where it seems to automatically select not to make a token and click right through the trigger, which seems like it would be an easy fix. I'm just assuming nobody has noticed or it's somehow just me. It happens regardless of what elf was cast or whether it has changeling etc... I experienced this in LRW-LRW-LRW booster draft. The trigger goes on the stack, but instead of prompting you to use the ability or not, it just clears from the stack and doesn't give you a token.
Thanks for looking into this
Edit: it mysteriously started working the following match, so I'm assuming it was a bug.
I'm having a problem with Lys Alana Huntmaster where it seems to automatically select not to make a token and click right through the trigger, which seems like it would be an easy fix. I'm just assuming nobody has noticed or it's somehow just me. It happens regardless of what elf was cast or whether it has changeling etc... I experienced this in LRW-LRW-LRW booster draft. The trigger goes on the stack, but instead of prompting you to use the ability or not, it just clears from the stack and doesn't give you a token.
Thanks for looking into this
Edit: it mysteriously started working the following match, so I'm assuming it was a bug.
- slyfox7777777
- Posts: 23
- Joined: 26 Mar 2014, 18:26
- Has thanked: 1 time
- Been thanked: 0 time
Re: Forge Beta: 11-05-2015 ver 1.5.47
by friarsol » 19 Jan 2016, 02:24
Check out the link in my signature, we request that bug reports for snapshot builds go -> viewtopic.php?f=52&t=6333slyfox7777777 wrote:Before I say this, I am actually using snapshot 1.5.48 r30408 but I don't think there is a thread for 1.5.48 yet, or at least I can't find it, so I'm going to post this problem here.
It actually sounds like somehow you right clicked on the trigger while it was on the stack and selected auto decline. Since that clears after each match and it started working after. Let us know if you see this again and that explicitly wasn't the case.I'm having a problem with Lys Alana Huntmaster where it seems to automatically select not to make a token and click right through the trigger, which seems like it would be an easy fix. I'm just assuming nobody has noticed or it's somehow just me. It happens regardless of what elf was cast or whether it has changeling etc... I experienced this in LRW-LRW-LRW booster draft. The trigger goes on the stack, but instead of prompting you to use the ability or not, it just clears from the stack and doesn't give you a token.
Edit: it mysteriously started working the following match, so I'm assuming it was a bug.
- friarsol
- Global Moderator
- Posts: 7593
- Joined: 15 May 2010, 04:20
- Has thanked: 243 times
- Been thanked: 965 times
Re: Forge Beta: 11-05-2015 ver 1.5.47
by Nekoatl » 19 Jan 2016, 05:38
I've done this a few times through mouse jitter before I bought a mouse pad designed to work with laser mice. If you can't right-click the ability on the stack to see what options were checked due to auto-yields, you can click the Forge button in the top-left, navigate to "Game -> Auto-Yields", and remove the ability from the list. Then, the next time the ability triggers, you'll be able to right-click it and see the check boxes.friarsol wrote:It actually sounds like somehow you right clicked on the trigger while it was on the stack and selected auto decline. Since that clears after each match and it started working after. Let us know if you see this again and that explicitly wasn't the case.
Re: Forge Beta: 11-05-2015 ver 1.5.47
by brockfanning » 23 Jan 2016, 10:08
Description: I'm running into an issue when trying to start a quest tournament. I suspect that some data file has become corrupted, because I've already done plenty of tournaments without any problems, and now I am getting consistent crashes.
The crashes occur when I go to the tournaments page, and there is an auto-generated tournament available, and I click "Start", and then confirm that I want to start. The crash happens right there, and I'll provide the output below. Another note: if I click "Continue" on the exception dump popup, and try again to click "Start", it says "You are currently in a draft. You should leave or finish that draft before starting another." If I restart Forge (or my computer) and try again, and get the crash again. One more note: I happened to have a token available after this started, and so I tried starting a token-generated tournament, and that worked fine. So this seems to be related to the auto-generated tournaments only.
I wish I could remember my exact steps before this started happening. Sorry that I can't. Do you think there is any manual tweak or workaround I can do to get past this? Thank you for the software!
The crashes occur when I go to the tournaments page, and there is an auto-generated tournament available, and I click "Start", and then confirm that I want to start. The crash happens right there, and I'll provide the output below. Another note: if I click "Continue" on the exception dump popup, and try again to click "Start", it says "You are currently in a draft. You should leave or finish that draft before starting another." If I restart Forge (or my computer) and try again, and get the crash again. One more note: I happened to have a token available after this started, and so I tried starting a token-generated tournament, and that worked fine. So this seems to be related to the auto-generated tournaments only.
I wish I could remember my exact steps before this started happening. Sorry that I can't. Do you think there is any manual tweak or workaround I can do to get past this? Thank you for the software!
- NullPointerException | Open
- brockfanning
- Posts: 12
- Joined: 29 May 2009, 22:15
- Has thanked: 3 times
- Been thanked: 0 time
Re: Forge Beta: 11-05-2015 ver 1.5.47
by fatguy86 » 25 Jan 2016, 18:29
I have been having a lot of crashes playing multiplayer over lan, the crashes have been happening on 2 gaming computers running windows 7 professional x64 with java version 8 update 71. I decided to try multiplayer over lan with the server on an xp machine with java version 7 udpate 15. While trying to play Rendclaw Trow from client computer the server crashed.
the following is the report that I got:
Description: [describe what you were doing when the crash occurred]
Any advice on these errors would be greatly appreciated.
the following is the report that I got:
Description: [describe what you were doing when the crash occurred]
- NullPointerException | Open
Any advice on these errors would be greatly appreciated.
- fatguy86
- Posts: 1
- Joined: 25 Jan 2016, 18:18
- Has thanked: 0 time
- Been thanked: 0 time
Re: Forge Beta: 11-05-2015 ver 1.5.47
by mlegora » 25 Jan 2016, 23:55
Hello,
In deck editor mode, when I try to find a card that is in multiple sets, it only shows me the card from a single set. For example, if I search Volcanic Island, it only shows me the VMA version, and no others. Same goes for Path to Exile and Basic Lands (Swamp etc only shows the most recent version). I know there are multiple prints of this card, yet it only shows me one. I tried adding a filter to search all sets, but still only shows that one. There doesn't appear to be a setting to change this. In the android version, I know you can long press the card and choose "Change Preferred Card Art" but again, I don't see anything at all that allows me to do so. This occurs in both Windows and OSX. I'm not sure if it is a current bug, or if I am just doing something wrong. I searched for a solution, but I couldn't seem to find an answer. Any help would be appreciated, thanks!
In deck editor mode, when I try to find a card that is in multiple sets, it only shows me the card from a single set. For example, if I search Volcanic Island, it only shows me the VMA version, and no others. Same goes for Path to Exile and Basic Lands (Swamp etc only shows the most recent version). I know there are multiple prints of this card, yet it only shows me one. I tried adding a filter to search all sets, but still only shows that one. There doesn't appear to be a setting to change this. In the android version, I know you can long press the card and choose "Change Preferred Card Art" but again, I don't see anything at all that allows me to do so. This occurs in both Windows and OSX. I'm not sure if it is a current bug, or if I am just doing something wrong. I searched for a solution, but I couldn't seem to find an answer. Any help would be appreciated, thanks!
- mlegora
- Posts: 3
- Joined: 25 Jan 2016, 23:44
- Has thanked: 0 time
- Been thanked: 0 time
Re: Forge Beta: 11-05-2015 ver 1.5.47
by friarsol » 26 Jan 2016, 00:09
In the deck editor, click on the settings icon (the wrench) the first checkbox says "Unique Cards Only" uncheck this box.mlegora wrote:Hello,
In deck editor mode, when I try to find a card that is in multiple sets, it only shows me the card from a single set. For example, if I search Volcanic Island, it only shows me the VMA version, and no others.
- friarsol
- Global Moderator
- Posts: 7593
- Joined: 15 May 2010, 04:20
- Has thanked: 243 times
- Been thanked: 965 times
Re: Forge Beta: 11-05-2015 ver 1.5.47
by mlegora » 26 Jan 2016, 00:21
I feel like an idiot now. I had to scroll left to see the option. I wasn't seeing it at first. This was driving me crazy because I know for a fact I was seeing the different sets on my other computer, I must have unchecked the box originally. Thank you so much!
EDIT:
Also, I was in image view. That's what was throwing me off, as these options are not viewable in image mode, only in list mode.
EDIT:
Also, I was in image view. That's what was throwing me off, as these options are not viewable in image mode, only in list mode.
- mlegora
- Posts: 3
- Joined: 25 Jan 2016, 23:44
- Has thanked: 0 time
- Been thanked: 0 time
Who is online
Users browsing this forum: No registered users and 61 guests